Clint Patterson's Blog


Read the thoughts and musings of a cultured redneck here

2022 Halloween IOT Props & Recap

This year I made 2 different Halloween IOT props. I used the same or similar techniques from the previous years... Actobotics for building out the structures and support, for the IOT controller and software side, and pneumatic powered "mechs" from for the movement. The new addition this year was adding in a FrightProps "Picoboo" controller to the setup, which brought on great possibilities. Adding this allowed me to add in audio and instantly cut power on and off to multiple outlets. So I turned lights on and off, fans on and off and strobed some strobe lights. 

If you're interested in previous years implementations check them out below:

As I bult the devices I posted some behind the scenes FB posts and a tweet..

Then when Halloween came we were fortunate to have the rain stop and I got some good reactions on the reactions video. 


2021 FunHouse Halloween IOT Project

This year I took the same clown head and built a body around it that can move and added in some fog machine love and set it all on a table to troll the kids in our neighborhood.

If you're interested in previous years implementations check them out below:

Here's a behind the scenes video showing the backside in a tweet..



And here's a video showing the reactions from the kids

2020 Halloween IOT Coffin Clown
2020 Halloween Summary Image


In 2020 I updated the Halloween IOT setup to be a clown in a coffin that was controlled remotely from my site. We had a great time with it.


If you're interested in previous years implementations check them out below:

Here's a video walking through this year's setup


2019 Particle Powered Fright Props
Specify Alternate Text

When we moved into the neighborhood everyone told us “Just wait til Halloween”. Well, they were right! Our friend up the street, Jay Ziobrowski, is super passionate about Halloween and turns his garage, driveway, and entire front yard into a magical haunted house that’s free to kids in the neighborhood. After doing this for several years, everyone in the neighborhood and surrounding area knows about this and the result is that our street gets blocked off by cops and is absolutely flooded during Halloween. It’s non-stop action from 4:30 to somewhere around 10pm and it’s a really fun time.

After running out of candy in the first 2 hours on year 1 we knew we needed to step it up in following years. So, each year I’ve tried to contribute to the energy and excitement on our street by creating some type of Particle-based IOT Halloween device. Check out the devices from previous years:

Halloween, a Great Opportunity to Get Kids Involved & Learning IOT!
Over the years I’ve had my friend’s kids help me with the setups. That is, since these devices are mobile controlled, I enlist kids to push the button on their mobile phones while I record the reactions of trick-or-treaters from my phone. One of the kids has taken an interest in wanting to know how to build these things, so this year I’ve been working with my friend’s son to both build the devices and teach him along the way. I even gave him a Particle dev kit. It has been a fun project for everyone. I’ve also been overwhelming him with text messages and videos as I make incremental progress on each device. Now he’s using Particle at his school for his science project!

Here are some pics from when we first got started…

A kid learning IOT at Halloween

A kid learning IOT at Halloween

Compressed Air, The Key to Speed & The Key to Scaring People!
After doing this for a few years I realized that HOA’s don’t like fire breathing pumpkins and that the best way to scare people is by using compressed air in some shape, form, or fashion. Geared motors just don’t move fast enough … or … if you do make them move fast enough, they are too dangerous and could potentially hurt someone. So, for the past two years I’ve been using a servo to press the button on an air hose to blow air out and move some spooky object toward trick-or-treaters. Nobody gets mad about getting hit with a gust of air!

Last year, right after Halloween, I decided to try something new. I ordered a pneumatic cylinder and solenoid kit from FrightProps. I had no idea how to really make it work, but I wanted to try and low and behold I was able to figure it out. It was way easier than I thought and FrightProps even provided very helpful videos to walk through the hookups for everything. Just a few weeks after last Halloween my mind was already spinning about next year’s Halloween. The pneumatic cylinders with solenoid kits move a lot faster, you can control the speeds, and they use less air. The only negative is that these could potentially be more dangerous. Though, I’m countering the danger by creating physical space around the implementations so that no one will get close enough to be hit or injured. So, I’m happy with the tradeoff and will take extra precaution in the initial setups.

Here's a picture of the solenoid kit from Fright Props

Solenoid kit pic from FrightProps

Quick Show of the Headless Clown & Trash Can “Slimer” in Action

The (Main) Parts
There are a lot of parts used in these devices. Of course, you must have wires, wifi, power, and all the normal things you would anticipate. However, I’m going to just list the main items below. If you have questions about other parts or want to build your own, just submit an email to me through this website and I can connect with you and help you with the smaller details. That said, here is the basis for both IOT Halloween devices:

The Build
One thing to note is that these devices are using the exact same principles, concepts, and code to make them work. At a high level the solenoids just need to be hit with a 12-volt current to make the pneumatic cylinder fire. To bring the pneumatic cylinder back in, simply turn off the power.

To do this we are using a relay that can be controlled by a Particle microcontroller, a Photon. The relay essentially breaks the circuit of the 12 volts going to the solenoid. Then, whenever we call the cloud web service endpoint in the Particle cloud, it invokes a function in the microcontroller which sends the relay a signal. The relay then completes the circuit which allows the 12 volts to flow to the solenoid which consequently causes the cylinder to fire. We let it fire for a specified period of time (say .200 of a second) then we cut power which causes the head to go back in. We control the speed going both in and out via the speed control valves on the solenoids. So, if you had to draw one negative of the solenoid it would be that you can’t programmatically control the speed.

The Slimer in the Trashcan implementation is such that the cylinder needs to be stabilized yet, due to the Slimer mask and body we couldn’t have any support mechanisms coming from the sides to stabilize the cylinder. Since the Slimer ghost must move up and down vertically we need to allow it room to do so. What this means is that the cylinder needed to be stabilized from the bottom. The cylinders I ordered are threaded at the bottom with 3/8 of an inch thread. This happened to match to some steel plumbing pipes that you can find at your local Lowes or Home Depot. So, I bought a few pieces to connect and make it stand up on its own. After that I added in weighted sandbags to keep the cylinder from wobbling whenever it fires. I attached velcro to the solenoid and breadboard and have the parts sticking to the inside of the trashcan walls. You will see these in the build pics below.

The Headless Clown implementation uses actobotics for its internal structure. Actobotics are awesome and are basically like metal legos that you can easily configure however you would like and mount anything you want to them. I’ve mounted the cylinder, hoses, and breadboard setup to it. I stuck the actobotics down into 2 bales of hay for stabilization.

Here are some pics from the build out(s):

The Code
The code to make this work is very simple. I have identical code running on both devices to make these things work. The only thing that is different is the device id!

In Particle – I’ve written a simple program that creates a cloud function which invokes a function on the Photon and all that function does is write a pin from low to high… that’s it! What we’ve done is inject a relay into the circuit of the solenoid which allows us to use some logic to complete or short the circuit.

Here’s the firmware (code) that I’m using for the Particle Photons:


On the Web – I’ve written a basic jQuery AJAX function to call these web API (services) when buttons are clicked. Maybe jQuery is not cool anymore, but it’s pretty simple to implement so it works for me!

Here’s the code I’m using to make an HTTP Post request when a button is clicked. And if you’re worried about me showing you my access token below, no worries… I’ve already recycled it!

Structural & Electrical Video Walkthrough
In this section I aim to give you a structural overview of the devices. Both devices use pneumatic cylinders but are being stabilized in different ways.

Code Video Walkthrough
In this section I walk you through the setup of the devices and the code that I’m using to make them work. The whole point here is… if I can do this, then you can too!

The Halloween Reactions
In my area we currently have an 80% chance of rain on Halloween night so I'm not sure if we'll have any trick-or-treaters at all. I guess we'll see. If the weather cooperates, I will update this page after Halloween with a video showing reactions we get from trick-or-treaters and their parents. Stay tuned for the hopeful post-Halloween-video update!

Clint Patterson

I also blog on other sites...

And contribute to OSS Documentation...

See my pics on UnSplash